Automatic air and gas vents for liquid systems AE39.2 (Carbon steel ; 21/2" x 11/2" and 3" x 11/2" – DN 65 x DN 40 and DN 80 x DN 40)
The AE39.2 range of automatic steam traps are designed to remove air or gases from water and other liquid systems, without requiring any external power source.
They are capable of handling large loads during start-up as well as smaller loads in continuous, modulating operation with a single orifice.
These floating float type traps are manufactured from carbon steel, available with soft seating, and can be used in combination with other air removal and separation systems or directly applied at high points in distribution piping.
- Suitable for start-up and continuous operation with a single orifice.
- Allow for quick and easy in-line maintenance.
- Corrosion resistant internal parts.
- No balancing tube required.
- Various soft sealing options.
- Cold, hot and superheated water or other liquids compatible with construction
- AE39.2-5, 10, 20, 20, 28 and 32 - carbon steel.
- 21/2" x 11/2" and 3" x 11/2"; DN 65 x DN 40 and DN 80 x DN 40.
- Female thread ISO 7 Rp or NPT.
- Flanged EN 1092-1 PN 40.
- Flanged ASME B16.5 Class 150 or 300.
- Socket weld (SW) ASME 16.11.
- Vertical in-line installation.
- It must be installed absolutely vertical at the points of the
- Installation should be installed absolutely vertical where air tends to accumulate.
- See IMI - Installation and Maintenance Instructions
MAX.AP:
- AE39.2-5 – 5 bar
- AE39.2-10 – 10 bar
- AE39.2-20 – 20 bar
- AE39.2-28 – 28 bar
- AE39.2-32 – 32 bar