Droplet separator special run S25S HV-VH

The centrifugal separators of the S25 HV and VH series remove moisture from steam and compressed air lines. The steam and compressed air pass through the separator and, as a result of the centrifugal forces and vortex effects, particles with a higher specific gravity such as water and oil droplets, suspended moisture, dirt and scale are separated from the fluid. Flanged connections

The condensate collected at the bottom of the separator must be automatically drained by means of a suitable steam or compressed air trap.

  • Different installation possibilities
  • No moving parts
  • Maintenance-free design.

  • Steam, compressed air and other gases.

  • S25/S HV or VH - carbon steel

  • DN 15 to DN 200.

  • With flanges EN 1092-1 PN 16 or PN 40.
  • ASME B16.5 Class 150 or 300 flanges on request.
  • Female thread ISO 7 Rp or NPT on request

  • Always with condensate discharge facing downwards.
  • See IMI - Installation and maintenance instructions