Humidity separators horizontal PN16-40 DN15-150 SH25S
The SH25S horizontal centrifugal droplet separator of the SH family removes moisture from the fluid in the steam and compressed air lines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, particles of higher specific gravity such as water and oil or small droplets of suspended moisture as well as dirt or scale are separated. The condensate collected in the lower part of the separator must be discharged by means of a condensate drain or compressed air eliminator.
- Different installation possibilities
- No moving parts
- In-line design
- Steam, compressed air and other gases.
- SH25S - carbon steel.
- 1/2" to 6"; DN 15 to DN 150.
- Flanged EN 1092-1 PN 16 or PN 40.
- Flanged ASME B16.5 Class 150 or 300.
- Horizontal with condensate discharge downwards.
- See IMI - Installation and maintenance instructions.