Humidity separators PN16-40 DN15-300 S25/S
The S25 series centrifugal separators remove moisture from steam and compressed air pipelines. Steam and compressed air pass through the separator and, as a result of centrifugal forces, impacts and vortex effects, particles with a heavier specific gravity, such as water and oil droplets, suspended moisture, dirt and scale are separated from the fluid.
Condensate collected at the bottom of the separator must be drained automatically by means of a suitable steam or compressed air trap.
- Various installation possibilities.
- No moving parts.
- Maintenance-free design.
- Flanged connection for condensate.
- Steam, compressed air and other gases.
- S25/S - carbon steel
- DN 15 to DN 300.
- With flanges EN 1092-1 PN 16 or PN 40.
- ASME B16.5 Class 150 or 300 flanges on request.
- Female thread ISO 7 Rp or NPT on request.
- Standard flanges PN 16 DN 65 are supplied with 4 holes. 8 holes, according to EN 1092, on request.
- See IMI - Installation and maintenance instructions.