Sample sampling chiller SC332-SC432-SC532
ADCA sample coolers SC332-SC432-SC532 are specially designed to cool steam boiler water samples for analysis. These sample coolers prevent the formation of re-evaporation of samples obtained from hot liquids under pressure, which can be hazardous to the integrity of the operator performing the operation and will result in an incorrect water sample. This device can be used for boiler water analysis as well as other types of sampling or cooling applications compatible with the materials of construction.
- Corrosion resistant body and internal parts.
- Auto sample drain (top inlet, bottom outlet).
- Sample inlet valve.
- Cooling water inlet valve.
- Temperature indicator.
- Bolted top plate.
- Different sizes and connection materials on request.
- Steam boilers and hot water systems.
- SSC332/SS, SC432/SS and SC532/SS - stainless steel body and coil.
- All above models are available in high pressure versions e.g. SC332H/SS.
- SC332 and SC332H: Cooling water inlet/outlet: 1/2" (ISO 7 Rp or NPT).
- Sampling tube inlet/outlet: 10 mm O/D. SC432, SC532, SC432H and SC532H: Cooling water inlet/outlet: 3/4" (ISO 7 Rp or NPT).
- Sampling tube inlet/outlet: 10 mm O/D.
- Vertical installation. See IMI - Installation and maintenance instructions.
- The cooling water must be at maximum flow rate before opening or closing the sample inlet valve to avoid the risk of scalding.
- The sample valve must also be closed before opening the cooling water valve.
- The sampling coil must always be completely submerged in water.
- 30 to 60 kg/h of sample liquid at ≈30 ºC with 1 m³/h of cooling water inlet at 15 ºC.
- For other pressures, temperatures and/or certified values, please consult the manufacturer.